Technical Support

Networx Instructions

NX-148E   ARMING IN “EXIT” MODE                                   EXIT is used when the user is away from the  premises and wants the interior protected (the motion detectors ON). 1. Close all protected doors and windows. 2. Press the EXIT key. Leave. ARMING IN “STAY” MODE                      STAY is used when the user is inside the premises and wants protection around the...

Read more ...

Regency 2605/2615 Operating Instructions

ARMING SYSTEM Enter access code.  If green ready light is on, all zones will be protected.  If the green light is off and one or more of the zone lights are on, the zones in violation will not be protected. INTERIOR ZONES To arm any zone designated as an interior zone, the interior button must...

Read more ...

Silent Knight 2730 Operating Instructions

ARMING SYSTEM Enter access code. If green light is on, all zones will be protected. If green light is off and one or more of the zone lights are one, the zones in violation will not be protected. ZONE STATUS LIGHTS 1 THROUGH 8 A) When a zone light is on, something on that zone is open....

Read more ...

Silent Knight 2820 – Regency 4720 Operating Instructions

SYSTEM TEST To initiate a system test, press the test button then enter the master operating code.  The system will perform a display lamp test, bell test, and communicator test. RESETTING ALARMS To reset the panel from an alarm condition, enter a valid operating code. ALARM MEMORY DISPLAY To display the current alarm memory, press...

Read more ...

Simon XT Operation Guide

Simon XT Operation Guide

Read more ...

BAP Vista instructions

  6162 Keypad   ARMING IN “AWAY” MODE AWAY is used when the user is away from the  premises and wants interior protection (usually means that the motion detectors will be ON). Press the 4 digit code and AWAY (or # then AWAY if quick arm is enabled)   ARMING IN “STAY” MODE STAY is...

Read more ...

Everfocus ECOR and Paragon Support

Everfocus ECOR Series DVR   The Everfocus ECOR series DVR is a common DVR that you may have that was  installed by BAP. The Everfocus Paragon .DVR operates very similar to this unit.   We have linked to various videos from the manufacturer below to help you discover operation and features.        ...

Read more ...

2GIG Instructions

Video Help Arming AwayArming StayBypassing ZonesChime SettingsChanging the Master CodeSecondary CodesSet Date and TimePerforming a System TestWorking with On-Screen Trouble AlertsAdjust Brightness and Volume 

Read more ...

DVR/NVR Instructions

Flir/Digimerge DNR 200 Series

Read more ...

Hikvision

DVR/NVR HelpPlaying Back Recorded VideoBacking Up or Exporting Video

Read more ...

Qolsys IQ Panel Help

Read more ...

2GIG Instructions

Video Help   Arming Away Arming Stay Bypassing Zones Chime Settings Changing the Master Code Secondary Codes Set Date and Time Performing a System Test Working with On-Screen Trouble Alerts Adjust Brightness and Volume  

BAP Vista instructions

    ARMING IN “AWAY” MODE AWAY is used when the user is away from the  premises and wants interior protection (usually means that the motion detectors will be ON). Press the 4 digit code and AWAY (or # then AWAY if quick arm is enabled)   ARMING IN “STAY” MODE STAY is used when …

DVR/NVR Instructions

Flir/Digimerge DNR 200 Series

Everfocus ECOR and Paragon Support

  The Everfocus ECOR series DVR is a common DVR that you may have that was  installed by BAP. The Everfocus Paragon .DVR operates very similar to this unit.   We have linked to various videos from the manufacturer below to help you discover operation and features.         An Introduction to the …

Hikvision

DVR/NVR Help Playing Back Recorded Video Backing Up or Exporting Video

Networx Instructions

  ARMING IN “EXIT” MODE                                   EXIT is used when the user is away from the  premises and wants the interior protected (the motion detectors ON). 1. Close all protected doors and windows. 2. Press the EXIT key. Leave. ARMING IN “STAY” MODE                      STAY is used when the user is inside the premises and wants protection around the perimeter …

Qolsys IQ Panel Help

Regency 2605/2615 Operating Instructions

ARMING SYSTEM Enter access code.  If green ready light is on, all zones will be protected.  If the green light is off and one or more of the zone lights are on, the zones in violation will not be protected. INTERIOR ZONES To arm any zone designated as an interior zone, the interior button must …

Silent Knight 2730 Operating Instructions

ARMING SYSTEM Enter access code. If green light is on, all zones will be protected. If green light is off and one or more of the zone lights are one, the zones in violation will not be protected. ZONE STATUS LIGHTS 1 THROUGH 8 A) When a zone light is on, something on that zone is open. …

Silent Knight 2820 – Regency 4720 Operating Instructions

SYSTEM TEST To initiate a system test, press the test button then enter the master operating code.  The system will perform a display lamp test, bell test, and communicator test. RESETTING ALARMS To reset the panel from an alarm condition, enter a valid operating code. ALARM MEMORY DISPLAY To display the current alarm memory, press …

Simon XT Operation Guide

Simon XT Operation Guide