6162 Keypad

ARMING IN “AWAY” MODE

AWAY is used when the user is away from the  premises and wants interior protection (usually means that the motion detectors will be ON).

Press the 4 digit code and AWAY (or # then AWAY if quick arm is enabled)

ARMING IN “STAY” MODE

STAY is used when the user is inside the premises and wants protection around the perimeter (the motion detectors OFF).

Press the 4 digit code and “STAY” (or # then STAY if quick arm is enabled)

ARMING IN “NIGHT” MODE

NIGHT is used when you have sensors such as motions in paths you will not cross at night but should be off when you are at home in STAY mode.

Press the 4 digit code and NIGHT. (or # then NIGHT if quick arm is enabled)

.DISARMING SYSTEM

Enter code then OFF(1key).

ADDING/CHANGING USER CODES

• Press “SETTINGS”

• Select “4” for Set User Code Option

• Enter a master code and then * at the prompt

• Select 1 to add a user

• Enter the 2-digit user number and then * (example: “03*” for user #3, “52*” or user #52).

• At the “New User Code” prompt enter the new 4-digit user code.

• A short “ding” alerts you that the new code was accepted.

DELETING USERS

• Press “SETTINGS”

• Select “4” for Set User Code Option

• Enter a master code and then * at the prompt

• Select 2 to delete a user

• Enter the 2-digit user number and then * (example: “03*” for user #3, “52*” or user #52).

BYPASSING ZONES

Press “4 digit code” + “BYPASS (6 key) + “2 digit zone number”

DISPLAY FAULTED ZONES

Press *

SILENCE ALARM

Enter code then OFF(1key)

Keypad will continue to display zones that went into alarm.

Enter code then OFF(1key)

to clear

SILENCE TROUBLES

Enter code then OFF(1key)

CHIME

Enter 4 digit Code + Chime (9 key)